Home / All / Outdoor Fiber Optic Cables / ADSS Fiber Optic Cables /

FCJ factory ADSS All 72-core Dielectric Self-Supporting Fiber Optic Cable

FCJ factory ADSS All 72-core Dielectric Self-Supporting Fiber Optic Cable

FCJ factory ADSS All 72-core Dielectric Self-Supporting Fiber Optic Cable
FCJ factory ADSS All 72-core Dielectric Self-Supporting Fiber Optic CableFCJ factory ADSS All 72-core Dielectric Self-Supporting Fiber Optic CableFCJ factory ADSS All 72-core Dielectric Self-Supporting Fiber Optic CableFCJ factory ADSS All 72-core Dielectric Self-Supporting Fiber Optic CableFCJ factory ADSS All 72-core Dielectric Self-Supporting Fiber Optic Cable
CategoriesADSS Fiber Optic Cables
BrandFCJ Fiber Optic Products Manufacturer
ModelADSS
colorblack
diameter6.25<=5
characteristicsplastic
Unit PriceUS $ 20 / cubic meter
FOB portGuangzhou
Terms of PaymentL/C
Download
Update TimeNov 21,2024
Detail Information
Description
ADSS cable is loose tube stranded. Fibers,  250μm , are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. it is covered with thin PE (polyethylene) inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer sheath.
Characteristics
· Can be installed without shutting off the power
· Excellent AT performance, The maximum inductive at the operating point of AT sheath can reach 25kV
· Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops
· Large span lengths and the largest span is over 1000m
· Good performance of tensile strength and temperature
· The design life span is 30 years
Application
The actual status of overhead power lines is taken into full consideration when ADSS cable is being designed. For overhead power lines under 110kV, PE outer sheath is applied. FOR power lines equal to or over 110kV, AT outer sheath is applied. The dedicate design of aramid quantity and stranding process can satisfy the demand on variou
Standards
ADSS cable complies with Standard IEEE P 1222 as well as IEC 60794-1.
Optical Characteristics
 G.652G.65550/125μm62.5/125μm

Attenuation
(+20ºC)
@850nm  ≤3.0 dB/km≤3.0 dB/km
@1300nm  ≤1.0 dB/km≤1.0 dB/km
@1310nm≤0.36 dB/km≤0.40 dB/km  
@1550nm≤0.22 dB/km≤0.23dB/km  
Bandwidth
(Class A)
@850nm  ≥500 MHz·km≥200 MHz·km
@1300nm  ≥1000 MHz·km≥600 MHz·km
Numerical aperture  0.200±0.015NA0.275±0.015NA
Cable Cutoff Wavelength≤1260nm≤1480nm  
Storage/Operating Temperature : -40ºC to + 70ºC
Review
  • Loading...
Please send your message to us
*Email
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
follow us: