FCJ factory GYFXY Non-metallic Unitube Non-Armored Gyfxy Fiber Optic Cable for Aerial Outdoor
FCJ factory GYFXY Non-metallic Unitube Non-Armored Gyfxy Fiber Optic Cable for Aerial Outdoor
GYFXY Non-metallic ,The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. Over the tube. water-blocking material is applied to keep the cable watertight. Two parallel Fiber Reinforced Plastics (FRP) are placed at the two side. The cable is completed with a polyethylene(PE) sheath.
· Good mechanical and temperature performance
· High strength loose tube that is hydrolysis resistant
· Special tube filling compound ensure a critical protection of fiber
· Two parallel FRPs ensure tensile strength
· PE sheath protects cable from ultraviolet radiation
· Small diameter, light weight and friendly installation
· Long delivery length
GYFXY cable complies with Standard YD/T 769-2010.
G.652 | G.655 | 50/125μm | 62.5/125μm | ||
Attenuation | @850nm | ≤3.0 dB/km | ≤3.0 dB/km | ||
@1300nm | ≤1.0 dB/km | ≤1.0 dB/km | |||
@1310nm | ≤0.36 dB/km | ≤0.40 dB/km | |||
|
@1550nm |
≤0.22 dB/km |
≤0.23dB/km |
|||
Bandwidth (Class A) | @850nm | ≥500 MHz·km | ≥200 MHz·km | ||
|
@1300nm |
≥1000 MHz·km | ≥600 MHz·km | |||
|
Numerical Aperture |
0.200±0.015NA | 0.275±0.015NA | |||
|
Cable Cut-off Wavelength |
≤1260nm |
≤1480nm |
|||
Cable Type (Increased by 2 fibers) | Fiber Count | Cable Diameter | Cable Weight kg/km | Tensile Strength | Crush Resistance | Bending Radius |
GYFXY -2~12 | 2~12 | 8.6 | 65 | 400/1000 | 300/1000 | 10D/20D |
Storage/Operating Temperature : -40℃ to + 70℃
- Loading...
- *Title
- *Content