FCJ factory GYFTC8S Aerial High Quality Outdoor Fig-8 Fiber Optic Cable with Layer Filling Loose Tube

The GYFTC8S Aerial fibers,  The fibers,  250μm , are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. FRP locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. After an Steel tape (SPS) moisture barrier is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene (PE) sheath to be figure 8 structure.

· High tensile strength of stranded wires meet the requirement of self-supporting and reduce the installation cost.

· Good mechanical and temperature performance

· High strength loose tube that is hydrolysis resistant

· Special tube filling compound ensure a critical protection of fiber

· The following measures are taken to ensure the cable watertight:

                - FRP used as the central strength member

                - Loose tube filling compound

                - 100% cable core filling

                - Steel tape moisture barrier

GYFTC8S cable complies with Standard YD/T 1155-2001 as well as IEC 60794-1.